MAKE IT WORK AGAIN.Small parts. A longer life for your equipment.
JAMSENGINEERING
Bag 0
PART MATCHING GUIDE

HP DesignJet cutter gears: CQ890-67108 and T830 comparison

Two cutter-gear listings mention the HP DesignJet T830. Choose by the cutter assembly and original gear profile as well as the printer model; the shared model name does not make the gears interchangeable.

Assembly reference and individual gear are different

CQ890-67108 identifies the cutter assembly used as the reference for one replacement internal gear. That listing supplies the gear, not a complete cutter assembly. Its matching instructions say to reuse the original bearing.

The CQ890-67108 listing also names T120, T125, T130, T520, T525, T530, T730 and T830 printers. Check the installed cutter assembly and compare its original gear before ordering.

Check for the T830 membrane version

The separate T830 cutter spur-gear listing has a thin membrane. Compare the membrane, bearing seat, bore and tooth profile with your original component. Use the original product and measurement photographs, including the second product view.

If the original gear does not match the pictured design, send photographs for a fit check. Do not choose solely because both listings include T830 in their descriptions.

Compare the bearing and shaft interface

Photograph both faces and the side of the removed gear. Check the bearing seat, overall width, hub shape and shaft opening against the measurements shown on the product page. Preserve the original bearing and mounting hardware where the listing instructs you to reuse them.

A cutter fault can involve more than one component. Identify the damaged part with the printer’s service instructions before assuming a replacement gear will resolve the fault.

Confirm the contents before ordering

Read “What is included” on each listing and use the part-specific matching note. These are independent replacement parts from Jams Engineering; HP references identify compatibility.

For an uncertain match, send the model label, cutter assembly reference and original-part photographs through our contact page. Printed parts ship within 3 calendar days from California, with free USPS standard shipping within the US.

Compare the available parts

Ask about your original part

Browse all replacement parts · Shipping & returns